HL-3150CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Clean the corona wire (video instructions available)

If you have print quality problems, clean the corona wire as follows:

 

 

Video Instructions

Click on the image to play the video instructions.
* This video is being streamed from YouTube and will open in a new window.
Click here to see this step with text.

 

 

Text Instructions

 
  1. Make sure that the machine is turned on.

  2. Open the top cover until it locks in the open position.
     

    Open top cover


     

  3. Take out a toner cartridge and drum unit assembly.

     

    Take out toner and drum

     

  4. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.

     

    Clean corona wire

     

    Be sure to return the tab to the home position (Tab) (1). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.

  5. Slide the toner cartridge and drum unit assembly into the machine.
    Make sure that you match the toner cartridge color to the same color label on the machine.

     

    Put in toner and drum

     

    Toner color match

     

     

  6. Repeat Steps 3 to 5 to clean each of the remaining corona wires.

  7. Close the top cover of the machine.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3150CDN, HL-3170CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.