Model discontinued. This page is no longer updated.

HL-2070N

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I factory reset the print server?

If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps:


  1. Turn off the printer.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off.
  4. Press the Go button six times. Make sure that all the LEDs light up to indicate the print server has been reset to its default factory setting.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2070N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.