Model discontinued. This page is no longer updated.

DCP-115C

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clean the Scanner to improve the copy or fax quality?

Check if the LCD shows some error.

If the LCD shows "unable to...", click here to see the FAQ:
"How do I clear the message Unable to..." ( "Unable to Change" "Unable to Clean" "Unable to Init" "Unable to Print" "Unable to Scan" )?


If the LCD shows any other message, refer to "FAQs & Troubleshooting" for information on the error message.



Follow the steps listed below to clean the Document Scanner.

 


  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Lift the Document Cover. Clean the scanner glass of the flat bed scanner with isopropyl alcohol on a lint free cloth.

  1. Clean the white bar and the glass strip located below with isopropyl alcohol on a lint free cloth.

Do not use isopropyl alcohol to remove dirt from the control panel. It may cause a crack on the panel.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-115C, DCP-120C, MFC-210C, MFC-215C, MFC-410CN, MFC-425CN, MFC-620CN, MFC-640CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.