ADS-3000N

FAQs & Troubleshooting

FAQs & Troubleshooting

Document Jam

Documents can jam in the Automatic Document Feeder (ADF) unit if they are not inserted or fed correctly or, if they are too long, or if multiple page were fed at the same time (multifeed).

 

Follow the steps below to clear a document jam.

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Take out any paper from the ADF that is not jammed.
  2. Open the Front Cover by pressing the Cover Release Lever (1).
    Open the Front Cover
  3. Pull the jammed document out of the machine.
    Pull the jammed document out

    Check for ripped paper inside the machine. Remove any ripped paper you find inside the machine.

  4. Close the Front Cover.
  5. Do one of the following:

    (For the models without machine's display (hereinafter called LCD))
    Press any button.

    (For the models with LCD)
    Press Stop(Stop).

    When clearing the multifeed, confirm that the data scanned before the multifeed was detected has been saved, and then start scanning again at the next page or the beginning of the document.

  • To avoid damage to the jammed document, DO NOT pull the document out before opening the Front Cover.
  • Take out any paper from the ADF before closing the Front Cover.
  • To avoid future document jams, do the following:
  • Adjust the Paper Guides to fit the width of the document. When Scan Size is set to Auto and you are scanning a document that contains multiple page sizes, insert narrow pages straight and as close to the center of the machine as possible. If the document does not feed straight, use Continuous Scanning.
  • Pull out the Extendable Output Tray until the last, and then position it to the length of your document.
  • Load the card vertically when scanning cards.
  • When you load an embossed plastic card such as credit card, place your card, embossed side down in the ADF.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-2800W, ADS-3000N, ADS-3600W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.