RJ-4230B

FAQs & Troubleshooting

Print free-length labels with the set length (Linux®)

To print free-length labels with the set length, add a label format using the brpapertoollpr tool in the terminal. This tool is installed and saved in the \usr\bin directory when you install the driver.

Adding label formats

Run the following command:
brpapertoollpr_(model name)[-P printer name] [-n label format name] [-w label width(mm)] [-h label height(mm)]

Options:

-P   Printer name e.g. TD-4550DNWB
-n   New label format name to be added to the PPD file
-w   Label width (in mm)
-h   Label height (in mm)

-g Label spacing

-b Bottom margin

-t Top margin

-r Right margin

-l Left margin

-e energyRank[optional]

-S 0/1/2(0:Continuous Length Roll/1:Die-Cut Label/2:Media With Marks)

For TD-4420DN(FC)/4550DNWB(FC):

Set 0 (Continuous Length Roll).

-m Mark

-o Mark offset

Example:
brpapertoollpr_td4550dnwb -P TD-4550DNWB -n Paper_Name -w 56 -h 128 -g 3.0 -b 3 -t 3 -r 1.5 -l 1.5 -S 1

Deleting label formats

Run the following command:
brpapertoollpr_(model name) [-P printer name] [-d label format name]

Options:

-P Printer name e.g. TD-4550DNWB
-d Deletes the label format

Example:
brpapertoollpr_td4550dnwb -P TD-4550DNWB -d Paper_Name

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us

Related Models

RJ-2030, RJ-2050, RJ-2140, RJ-2150, RJ-3050, RJ-3150, RJ-3230B, RJ-3250WB, RJ-4230B, RJ-4250WB, TD-4420DN, TD-4550DNWB

Content Feedback

To help us improve our support, please provide your feedback below.