PT-2700
 |
FAQs & Troubleshooting |
How do I eliminate the margin from the start or end of my label when printing?
Due to the construction of the tape mechanism, the one inch (25mm) piece of tape that is produced prior to every label cannot be eliminated. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
The following methods are useful for reducing tape use:
The following methods are useful for reducing tape use:
- Method 1 - Selecting "Small Margin" in the Cut Option setting:
- Press the [Label] key
.
- Press the arrow key
or 
to select "Cut Option".
- Press the arrow key
or 
to select "Small Margin".
- Press [OK] key
or [Enter] key 
.
This eliminates the margin at the end of the tape after printing as shown below:
- Press the [Label] key
- Method 2 - Printing several labels at once by using the "Copies" or "Numbering" function:
- Press the [Label] key
.
- Press the arrow key
or 
to select "Cut Option".
- Press the arrow key
or 
to select "Small Margin".
- Press [OK] key
or [Enter] key 
.
- While holding down the [Shift] key
, press the [Print] key
to display the Copies screen.
- Select "Copies" or "Numbering" using the arrow
or 
key.
- Press [OK] key
or [Enter] key 
and select the number of copies to be printed using the arrow 
or 
key, or type the number using the number keys.
- Press [OK] key
or [Enter] key 
.
This eliminates the margin of the subsequent labels as shown below:
- Press the [Label] key
- Method 3 - Printing different labels continuously:
- Press the [Label] key
.
- Select the "Cut Option" menu.
- Select "Chain".
- Press [OK] key
or [Enter] key 
.
- Enter the text.
- Press the [Print] key
.
- Repeat step 5 and 6 until all labels have been created.
- After the last label is printed, hold down the [Shift] key
and press the [Feed&Cut] key 
to finally cut the labels.
An example of the labels:
- Press the [Label] key
Content Feedback
To help us improve our support, please provide your feedback below.
