SL170
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
How do I draw up the lower thread?
-
Raise the presser foot using the presser foot lever.
![imaage image](/g/b/img/faqend/faqh00000477_008/au/en/1014209/faqh632_fig6001.gif) |
(1) Presser foot lever |
-
Lightly hold the end of the upper thread.
![image image](/g/b/img/faqend/faqh00000477_008/au/en/1023191/faqh477_fig8004.gif) |
(1) Upper thread |
-
While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower
and then raise the needle.
-
Pull on the upper thread to draw up the lower thread.
![image image](/g/b/img/faqend/faqh00000477_008/au/en/1014210/faqh477_fig8002.gif)
|
(1) Upper thread
(2) Lower thread |
-
Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.
![image image](/g/b/img/faqend/faqh00000477_008/au/en/1014211/faqh477_fig8003.gif) |
(1) Upper thread
(2) Lower thread |
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
J17s, JA1400, JV1400, SL170
Content Feedback
To help us improve our support, please provide your feedback below.