Model discontinued. This page is no longer updated.

DCP-130C

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 16/04/2020
  • ID: faq00100701_000

I cannot scan with brscan, brscan2, or brscan3 via USB (Linux)

Make sure you have installed the "libusb-0.1.4" library:

  • Ubuntu:       sudo apt-get install libusb-0.1-4
  • openSUSE: sudo zypper install libusb-0_1-4

Fedora Users

See also "I'm using Fedora 28. I cannot scan from my Brother Machine or it says that it cannot find the Brother Machine. (Linux)"

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-115C, DCP-120C, DCP-130C, DCP-135C, DCP-145C, DCP-150C, DCP-165C, DCP-185C, DCP-195C, DCP-330C, DCP-350C, DCP-375CW, DCP-385C, DCP-395CN, DCP-540CN, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7040, DCP-8020, DCP-8025D, DCP-9010CN, DCP-9040CN, DCP-9042CDN, DCP-J125, DCP-J315W, DCP-J515W, DCP-J715W, FAX-1820C, FAX-1840C, FAX-2480C, FAX-2820, FAX-2850, FAX-2920, FAX-8360P, MFC-210C, MFC-215C, MFC-235C, MFC-240C, MFC-250C, MFC-255CW, MFC-257CW, MFC-260C, MFC-290C, MFC-295CN, MFC-3220C, MFC-3240C, MFC-3360C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-4800, MFC-490CW, MFC-5440CN, MFC-5460CN, MFC-5490CN, MFC-5840CN, MFC-5860CN, MFC-5890CN, MFC-620CN, MFC-640CW, MFC-6490CW, MFC-665CW, MFC-685CW, MFC-6890CDW, MFC-7220, MFC-7340, MFC-7420, MFC-7440N, MFC-7820N, MFC-7840W, MFC-790CW, MFC-795CW, MFC-8220, MFC-8370DN, MFC-8440, MFC-8460N, MFC-8820D, MFC-8840D, MFC-885CW, MFC-8860DN, MFC-8880DN, MFC-8890DW, MFC-9120CN, MFC-9125CN, MFC-9160, MFC-9180, MFC-9320CW, MFC-9325CW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9660, MFC-9840CDW, MFC-9880, MFC-990CW, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W, MFC-J615W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit