MFC-L2750DW
![]() |
FAQs & Troubleshooting |
Scan to an Editable Text File (OCR)
![](/g/b/img/faqend/faq00100292_508/au/en/2480310/GUID-F5724EB1-BE9E-4997-A2DE-FF42D8B224A4-low.gif)
- The Scan to OCR feature is available for certain languages.
- Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software.
DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
- Load your document.
- Press
(SCAN).
- Press
or
to select the [Scan to PC] option, and then press OK.
- Press
or
to select the [OCR] option, and then press OK.
- If the machine is connected over the network, press
or
to select the destination computer.
- Press OK.
If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and then press OK.
- Do one of the following:
- To change the scan settings for this document, press Options or Copy/Scan Options and then go to the next step.
- To use the default scan settings, press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer connected to the machine.
- Select the scan settings you want to change:
- [Scan Type]
- [Resolution]
- [File Type]
- [Document Size]
- [ADF Auto Deskew] (available for certain models)
- [Remove Bkg Clr]
(available only for the [Colour] and [Grey] options.)
- Press OK.
- Press Start.The machine scans the document, converts it to editable text, and then sends it to your default word processing application.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW
- Load your document.
- Press .
- If the machine is connected over the network, press
or
to display the computer where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press [OK].
- Do one of the following:
- To change the scan settings, press [Options], and then go to the next step.
- To use the default scan settings, press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer connected to the machine.
- To scan both sides of the document (MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW):
- Press [2-sided Scan], and then select the document type.
OptionDescription2-sided Scan: Long Edge2-sided Scan: Short Edge - Select the scan settings you want to change:
- [Resolution]
- [File Type]
- [Scan Type]
- [Document Size]
- [Scan Settings]
- [ADF Auto Deskew] (available for certain models)
- [Remove Background Colour]
(available only for the [Colour] and [Grey] options.)
- Press [OK].
- Press [Start].The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.