If you regularly want to send the same fax to multiple recipients, you can do it easily by setting up a Group. Group allow you to send the same fax message to multiple numbers using a process called Broadcasting.

You can store 20 small Groups on your Brother machine or assign up to 207 numbers to a large Group. Every fax number you want to include in your Group must first be stored as its own One Touch or Speed Dial number, and each Group uses one One Touch or Speed Dial location.

This solution includes two options for setting up Groups:

To set up Groups from your machine's control panel, see Option 1.

If your machine is connected to the computer with the Brother software installed, you can set up Groups from your computer by following Option 2.

OPTION 1: SETTING UP A GROUP FROM THE CONTROL PANEL

A: Print a Tel Index list:

1. Press the Reports key.
   
   
2. Press the UP OR DOWN ARROW key to choose Tel Index List.
   
   
3. Press the OK key.
   
   
4. Press the UP OR DOWN ARROW key to choose Numeric or Alphabetic.
   
   
5. Press the OK key.
   
   

   Your Brother machine will print the Tel Index List.

   
   
6. Press the Stop/Exit key.

B: Set up a Group:

1. Press the Menu key.
   
   
2. Press the UP OR DOWN ARROW key to choose Fax.
   
   
3. Press the UP OR DOWN ARROW key to choose Address Book.
   
   
4. Press the UP OR DOWN ARROW key to choose Setup Groups.
   
   
5. Choose the One Touch key or Speed Dial location on which you want to store the Group:
   
   

   - To store a Group on a One Touch key, follow these steps:

   
   
   1. Press the One Touch key on which you want to store the Group.
      
      
   2. Go to STEP 6.
   
   
   

   - To store a Group on a Speed Dial location, follow these steps:

   
   
   1. Press the DOWN ARROW key.
      
      
   2. Use the dial pad to enter the three-digit Speed Dial location on which you want to store the Group.
      
      
   3. Press the OK key.
      
      
   4. Go to STEP 6
   
   
   
6. Use the dial pad to enter a Group number.
   
   
7. Press the OK key.
   
   
8. To add One Touch or Speed Dial numbers to the Group, follow these steps:
   
   

   - To add a One Touch number, press the One Touch key on which the number is stored.

   
   

   - To add a Speed Dial number, follow these steps:

   
   
   1. Press the DOWN ARROW key.
      
      
   2. Use the dial pad to enter the three-digit Speed Dial location on which the number is stored
   
   

   The LCD will display the One Touch and Speed Dial numbers as you add them to the Group.

   
   
   

   - One Touch locations begin with *.

   
   

   - Speed Dial locations begin with #.

   
   
9. Do one of the following:
   
   

   - To add more One Touch and Speed Dial numbers to the Group, repeat STEP 10.

   
   

   - If you are finished adding numbers to the Group, press the OK key

   
   
10. Do one of the following:
    
    

    - Use the dial pad to enter a Group name.

    
    

    The name can be up to 15 characters long.

    
    

    - To store the name without a Group, go to STEP 11

    
    
11. Press the OK key.
    
    
12. Do one of the following:
    
    

    - To save a default fax resolution setting with this Group, follow these steps:

    
    
    1. Press the UP OR DOWN ARROW key to choose Std, Fine, S. Fine, or Photo.
       
       
    2. Go to STEP 13.
    
    

    - If you do not want to save a default fax resolution with this Group, STEP 13.

    
    
13. Press the OK key.
    
    
14. Do one of the following:
    
    

    - To store another Group, go back to STEP 5.

    
    

    - If you are finished storing Groups, press the Stop/Exit key.

CONFIRM THE GROUP BY PRINTING A TEL INDEX LIST

To confirm that the numbers are saved in the correct group, print the Tel Index list again. On this list, Group numbers will be marked in the GROUP column.

In the above image, one Group has been successfully created and named TRAINING. The numbers assigned to a Group are listed under that Group's name (TRAINING, in this example).

When you broadcast a fax, each number in the Group is dialed individually. After the document is scanned into memory, the machine dials the first number in the Group, transmits the fax, hangs up, and then dials the second number in the Group. This process is repeated until every number in the Group is dialed.

If a sending to one number is unsuccessful because the line is busy or the line condition prevents the fax from being sent, the Brother machine will disconnect and dial the next number in the Group. Once all numbers in the Group have been dialed, the Brother machine will attempt to dial the unsuccessful number(s) again.

After the Brother machine has dialed (and redialed, if the initial attempt to send was unsuccessful) all of the numbers in a Group, it will print a broadcast report that displays which numbers in the Group were transmitted successfully and which ones failed. This report prints automatically and cannot be disabled.

OPTION 2: SETTING UP A GROUP FROM A COMPUTER

1. On the computer, left-click Start => (All) programs => Brother => MFCXXXX (your model number) => Remote Setup.
   
   
2. Network Users: If prompted, enter the password for the machine's network card. The default password is access.
   
   
3. Left-click Address Book.
   
   
   
   
4. Double-click Fax/Tel in the Type column next to a vacant One Touch or Speed Dial number and click the drop-down menu arrow on the right-hand side of the field.
   
   
5. Left-click a Group number from the drop-down menu to choose it.
   
   
   
   
6. Left-click the Destination field in the same row as the Type.
   
   
7. Use the computer's keyboard to enter the name or company name for this Group.
   
   
   
   
8. Place a check to the left of the numbers you want to store in the Group.
   
   

   - For example, place a check in the G1 column for numbers you want to save in Group 1 and place a check in the G2 column for numbers you want to save in Group 2.

   
   
   
9. Do one of the following:
   
   

   - To store another Group, repeat STEP4 through 8

   
   

   - To finish storing Groups, click Apply and wait as the information is uploaded into the Brother machine.

   
   

   If an error message stating "Error in Group setting. Please check group name, number and type entries" appears, the Group number assigned is already being used, a check was placed in a Group field where a One Touch or Speed Dial number is not stored, a number has been entered in the Destination field of the Group, or a Group has been assigned to another Group. Left-click OK and double check the setup of the Group.

   

   
   
   
   
   
10. Left-click Print at the bottom right of the Remote Setup window to confirm setup of the Group.
    
    
11. Left-click OK to close the Remote Setup screen.