MFC-6490CW

FAQs & Troubleshooting

FAQs & Troubleshooting

When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards?

If the received data is divided and printed on two pages or if you get an additional blank page, your Paper Size setting and/or the Reduction setting may not be correct for the paper you are using.

 

Adjust the paper size following the instructions listed below:

 

  1. Press the Menu key.
  2. Press the Up or Down Arrow key to choose General Setup and press OK.
  3. Press the Up or Down Arrow key to choose Tray Setting and press OK.
  4. Press the Up or Down Arrow key to choose Tray #1 or Tray #2 and press OK.
  5. Press the Up or Down Arrow key to choose Paper Size.
  6. Press the Right or Left Arrow key to select the correct size and press OK.
  7. Press Stop/Exit.

If you are using the fixed reduction feature, check to see if the reduction ratio is set to ON. (We recommend turning the setting to "AUTO REDUCTION" ON.) 

To check the reduction setting:

  1. Press the Menu key.
  2. Press the Up or Down Arrow key to choose Fax and press OK.
  3. Press the Up or Down Arrow key to choose Setup Receive and press OK.
  4. Press the Up or Down Arrow key to choose Auto Reduction.
  5. Press the Right or Left Arrow key to choose ON (or OFF)  and press OK.
  6. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-6490CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.