Model discontinued. This page is no longer updated.

MFC-665CW

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I know the current network configuration?

You can print the Network Configuration page by the following steps:


  1. Press Menu or Menu/Set on the control panel.
  2. Press Up or Down arrow/navigation key until Print Reports appears and press OK, Menu/Set or Set.
  3. Press Up or Downarrow/navigation key until Network Config appears and press OK, Menu/Set or Set.
  4. Press Black (Mono) Start or Color (Colour) Start. The network configuration page will be printed and you can see the current network configuration of your Brother machine.

If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-540CN, DCP-560CN, MFC-210C, MFC-3240C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-5440CN, MFC-5460CN, MFC-5840CN, MFC-5860CN, MFC-620CN, MFC-640CW, MFC-665CW, MFC-685CW, MFC-7220, MFC-7420, MFC-7820N, MFC-8460N, MFC-885CW, MFC-8860DN, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9840CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.