HL-2130

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 25/04/2013
  • ID: faq00000016_017

Page skewed

Print Quality Problem - Page skewedPage skewed

 

Please check the following points to solve the problem:

  • Make sure that the paper guides are set correctly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.
    Set paper guide

  • If you are using the manual feed slot, make sure the manual feed paper guides are set to the width of the paper that you are going to use.
    Fit manual feed paper guides

  • The paper tray may be too full. Make sure that the paper is below the maximum paper mark. If the paper is over the maximum paper mark, reduce the quantity of paper until the maximum paper mark appears.
    Set paper


  • Check the paper type and quality.
    Please refer to FAQs, "What kind of paper can I use? " and "What is the recommended paper?".

 

Click here to view other examples of print quality issues.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2130, HL-2132, HL-2135W, HL-2240D, HL-2242D, HL-2250DN, HL-2270DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit