DCP-J1200W(E)
 |
FAQ & Fehlerbehebung |
LED Patterns and Indications
The LEDs on your machine's control panel light up or blink to indicate machine status.
|
LED |
Description |
|
 |
The LED is off. |
|
 |
The LED is lit. |
|
 |
The LED is blinking. |
|
 |
The LED is blinking slowly and faintly. |
|
LED |
Status |
Description |
|
(Lit) |
Standby |
The machine is ready to print. |
|
(Blinking) |
Busy |
The machine is processing a print job. |
|
Warming Up (Low Temperature) |
The machine is warming up. |
|
Cooling Down (High Temperature) |
The machine is cooling down. |
|
Data Remaining |
There is print data in the machine's memory. To cancel the job and clear it from machine memory, press  (STOP). |
|
(Blinking alternately) |
Job Cancelled |
The machine is cancelling the print job. |
|
(Blinking slowly and faintly) |
Sleep |
In Sleep mode (Power Save mode), the machine acts as if it is turned off, but it can still receive data.
When you send a print job, the machine wakes up. |
| |
|
|
|
Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?
Haben Sie in den Handbüchern nachgesehen?
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
