Model discontinued. This page is no longer updated.

HL-1470N

FAQs & Troubleshooting

FAQs & Troubleshooting

How can I change the IP address?

Introduction

     

There are several different methods of assigning an IP address on your Brother printer:

  • Use the Printer front panel (if applicable)
  • Use the BRAdmin Professional Software
  • Use the ARP command
  • Use the an automatic IP address allocation method such as DHCP, BOOTP or RARP

Front Panel Method

  1. Press the '+' button until 'NETWORK' is displayed on the printer LCD panel.
  2. Press the 'Set' button to display 'TCP/IP' On printers with two line displays,
    'NETWORK' 'TCP/IP' is displayed.
  3. Press the 'Set' button. 
  4. 'TCP/IP ENABLE' is displayed. On printers with two line displays 'TCP/IP' 'TCP/IP ENABLE' is displayed.
  5. Press the '+' button
  6. IP ADDRESS is displayed. On printers with two line displays 'TCP/IP' 'IP
    ADDRESS' is displayed.
  7. Press the 'Set' button.

 

The current IP address of the printer is displayed and a flashing cursor will be at the first IP address setting.

 

The default IP address for a Brother printer is 192.0.0.192. To change this value use the '+' or '-' buttons to increase or decrease a value. When the value has changed, press the 'Set' button to accept the setting.

 

To change the Subnet mask do the following:

  1. Press the '+' button until 'NETWORK' is displayed on the printer LCD panel.
  2. Press the 'Set' button to display 'TCP/IP' on printers with two line displays
    'NETWORK' 'TCP/IP' is displayed.
  3. Press the 'Set' button.
  4. TCP/IP ENABLE is displayed. On printers with two line displays 'TCP/IP' 'TCP/IP ENABLE' is displayed.
  5. Press the '+' button until 'SUBNET MASK =' is displayed. One printers with two line displays 'TCP/IP' 'SUBNET MASK'
  6. Press the 'Set' button.

 

The current Subnet address of the printer is displayed and a flashing cursor will be at the first Subnet mask setting. 

 

To change this value use the '+' or '-' keys to increase or decrease a value. When the value has changed, press the 'Set' button to accept the setting.

 

When the Subnet mask has been set, press the 'Go' button and power cycle the printer.

 

BRAdmin Professional Software

 

The BRAdmin Professional software can be used to change the IP address of a Brother printer. It can set the IP address if it has not already been set, or it can change the address if it has already been set.

 

IP address has not been set yet

 

If the printer is set to its default factory settings, when you start the BRAdmin Professional software, the printer will appear as an unconfigured device. This means that the IP address needs to be set before you can communicate with it.

     

If the printer appears as an unconfigured device, double click it and you will be able to enter a IP address, subnet mask and gateway address. Click 'OK' to accept the settings and the printer is now ready to print.

 

IP address has been set, but you want to change it

 

To change the IP address information, double click the printer you wish to change and enter the print server password (refer to the print server userguide for information on passwords).

     

Select the 'TCP/IP' tab and enter the new IP address information.

 

ARP Command

 

The ARP command can be used by most systems that use the TCP/IP protocol. For example Linux systems, Unix systems and Microsoft Windows systems that use the TCP/IP protocol are supplied with a series of utilities that include the ARP command.

     

Click here to learn how to set the IP address using the ARP command.

 

Automatic IP address allocation using DHCP, BOOTP or RARP

 

Brother print servers are configured to automatically search for an IP address during their power on cycle. This means that when a Brother printer is powered on, it will attempt to obtain an IP address for any automatic system that may be in the network. This means that if you have a network that uses the DHCP protocol, the printer, if it is able to communicate with the DHCP server, will automatically receive an IP address. There is no special configuration required.

     

Equally, if the printer is connected to a network that uses the BOOTP or RARP protocols, the printer will automatically receive an IP address from either one of these systems providing your BOOTP and RARP servers are configured correctly.

     

Please note that if you manually assign an IP address using the BRAdmin software, the printer front panel or via the ARP command, the printer will no longer search for a DHCP, BOOTP or RARP server.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-2600CN, HL-3450CN, HL-7050, HL-7050N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.