Cannot connect to machine. Select an appropriate connection mode for the settings on DesignNCut. (E003)
Solutions
Select the same connection method as that selected on the machine.
When the machine is connected to your computer with the wireless connection, Standby (WLAN) message appears on the machine's LCD.
When the machine is connected to your computer with a USB cable, Standby (USB) message appears on the machine's LCD.
(1) Standby (WLAN) or Standby (USB) appears.
Changing machine mode
If you change the machine mode, follow the instructions below:
Turn off the machine by pressing .
Press and the on the operation panel at the same time, once the power comes on releasewhile still pressing down.
When the message Machine mode? appears on the
machine’s LCD, press to selectWLAN or press to select USB.
When the message Turn the machine off, then on again. appears, turn the machine off, then on again.
The current machine mode will appear on the machine's LCD.
If your question was not answered, have you checked other FAQs?
.
and the
to select WLAN or press 
to select USB.
