DS-940DW
 |
FAQs & Troubleshooting |
Access Web Based Management
- We recommend using the HTTPS security protocol when configuring settings using Web Based Management.
- When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box. To avoid displaying the warning dialog box, you can install a self-signed certificate to use SSL/TLS communication.
-
The default login password to manage machine settings is either:
-
the password located on the back or bottom of the machine preceded by “Pwd”
OR - initpass
-
the password located on the back or bottom of the machine preceded by “Pwd”
- Start your web browser.
-
Do one of the following:
-
When using Wireless Direct
Type "https://192.168.118.1" in your browser's address bar. -
When using infrastructure mode
Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
> Click here to see the machine's IP address.
For example:
https://192.168.1.2
-
When using Wireless Direct
-
If the machine prompts you for a password, type it, and then click
.
If you have not previously set your own password, type the default login password above.
You can now change your machine settings.
If the password is entered incorrectly three times, you will not be able to log in for three minutes.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the new configuration.
Content Feedback
To help us improve our support, please provide your feedback below.
