DCP-1616NW

FAQs & Troubleshooting

FAQs & Troubleshooting

Unpack your Brother machine

Follow the steps below to unpack the machine:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Open the box.
                  
    Open the box
               
  2. Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
                    
    Remove the Quick Setup Guide.
                 
  3. Remove the starter toner cartridge.
              
    Remove the starter toner cartridge.
               
  4. Remove the machine part required for A5 size printing.
               
    Remove the machine part required for A5 size printing.
                     
  5. Remove packing foam.
                                 
    Remove packing foam.
                    
  6. Lift the machine out of the box.
                                         
    Lift the machine out of the box.
                                      
  7. Remove the plastic bag.
                
    Remove the plastic bag.
                       
  8. Remove all blue protective tape.
                 
    Remove the plastic bag.
                               
  9. Open the scanner cover and remove the transparent sheet.
                    
    Open the scanner cover and remove the transparent sheet.
                   
  10. Close the scanner cover.
                                  
    Close the scanner cover.
           
  11. Open the top cover.
                                   
    Open the top cover.

    Do not touch the red colored parts to avoid print quality issues.
                 
    Do not touch the red colored parts.

  12. Remove the drum unit.
              
    Remove the drum unit.
            
  13. Unpack the toner cartridge.
                                          
    Unpack the toner cartridge.
              
  14. Remove the protective cover.
                                  
    Remove the protective cover.
                              
  15. Put the toner cartridge firmly into the drum unit until you hear it lock into place.
                               
    Put the toner cartridge firmly into the drum unit.
               
  16. Install the toner cartridge and drum unit assembly in the machine.
                       
    Install the toner cartridge and drum unit assembly in the machine.
                 
  17. Close the top cover.
                     
    Close the top cover.

     After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
            
    Close the top cover

    - For MFC Users: Go to STEP 18.

    - For DCP Users: Go to STEP 21.
      

  18. (Only for MFC models)
    Locate the LINE jack on the back of the machine.
              
    Locate the LINE jack on the back of the machine.
                
  19. (Only for MFC models)
    Plug the telephone line cord into the LINE jack.
                     
    Plug the telephone line cord into the LINE jack.
                 
  20. (Only for MFC models)
    Plug the other end of the telephone line cord into a modular wall jack (socket).
               
    Plug the other end of the telephone line cord.
                
  21. Plug the power cord into a standard AC power outlet (electrical socket).
                   
  22. (For MFC models)
    Press the On/Off(On/Off) button to turn on the machine.
                             
    (For DCP models)
    Press the On/Off(On/Off) button to turn on the machine.
     

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1610W, DCP-1615NW, DCP-1616NW, MFC-1910W, MFC-1911NW, MFC-1911W, MFC-1915W, MFC-1916NW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.