DCP-1616NW

FAQs & Troubleshooting

FAQs & Troubleshooting

Load paper in the paper tray

Follow the steps below to load paper in the paper tray:
 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

       

For A4 or Letter size paper

For A5 size paper

          

<For A4 or Letter size paper>

  1. Open the front cover.     
            
    Open the front cover
               
  2. Adjust the paper guide.
              
    Adjust the paper guide.
               
  3. Fan the paper.      
                            
    Fan the paper.
                      
  4. Load paper with the printing surface face up in the paper tray.
                       
    Load paper
                   
  5. Adjust the paper guides to fit the paper.
                        
    Adjust the paper guides

    Make sure that your papers are loaded properly.
                                    
    Load paper properly

     

  6. Open the top cover.
                       
    Open the top cover
            
  7. Lift the paper support flap.
                          
    Lift the paper support flap.
                                 
  8. Close the top cover.
            
    Close the top cover.

    After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
                   
    Close the top cover.

<For A5 size paper>

  1. Open the front cover.
              
    Open the front cover
                  
  2. Adjust the paper guide, and then install the A5 paper tray part you unpacked earlier.
               
    Adjust the paper guide, and then install the A5 paper tray part.
                
  3. Fan the paper.
                
    Fan the paper
                  
  4. Load paper with the printing surface face up in the paper tray.
                   
    Load paper
                             
  5. Press and slide the paper guides to fit the paper.
                   
    Press and slide the paper guides.
                             
  6. Adjust the paper guide.
                    
    Adjust the paper guide.

    Make sure that your papers are loaded properly.

                
    Load paper properly
                   

    Load paper properly

     

  7. Open the top cover.
                  
    Open the top cover.
                                  
  8. Lift the paper support flap.
                          
    Lift the paper support flap.
                     
  9. Close the top cover.
                       
    Close the top cover

    After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
                          
    Close the top cover.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1610W, DCP-1615NW, DCP-1616NW, MFC-1910W, MFC-1911NW, MFC-1911W, MFC-1915W, MFC-1916NW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.