TJ-4020TN

FAQs & Troubleshooting

FAQs & Troubleshooting

The left or right side of the label is not printed correctly.

The label size setting may be wrong.
Check the label size setting as follows:

  1. Connect your computer and the printer, and then make sure that the printer is turned on.
  2. Start the BPM (Brother Printer Management Tool), and then click the Printer Configuration button.
  3. Check the Paper Width/Paper Height settings in the FBPL tab.

The Print Head tension may be wrong.
Check the Print Head tension settings as follows:

  1. Adjust the Print Head tension using the Print Head Tension Adjustment Knob.
  2. Choose one of six levels of tension adjustment depending on the media width you use (1″ - 2″ (25.4 mm - 50.8 mm) or 3″ - 4″ (76.2 mm - 101.6 mm)).
    Adjust the Print Head tension
    The recommended Print Head tension values are:
    1.  For 1″ - 2″ (25.4 mm - 50.8 mm) media width
    2.  For 3″ - 4″ (76.2 mm - 101.6 mm) media width

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TJ-4020TN, TJ-4120TN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.