To use the Communication settings, please follow the steps below:

 

1. Open the Printer Setting Tool. (Refer to "Using the Printer Setting Tool (for Windows)".)


2. Select [Communication settings].

   [Communication settings] window appears.
    

3. Specify or change the settings.
    

For information on items in the Communication settings window, refer to the following links (the screens are from Windows):

 

• Settings Dialog Box
• Menu Bar
• General Tab
• Wireless LAN Tab
• Wireless Direct Tab
• Bluetooth Tab
• Applying Setting Changes to Multiple Printers
   

Settings Dialog Box

1. Disable these settings
   When this check box is selected, appears in the tab, and the settings can no longer be specified or changed.
   The settings in a tab where appears will not be applied to the printer even if [Apply] is clicked. In addition, the settings in the tab will not be saved or exported when [Save in Command File] or [Export] command is executed.
   To apply, save or export the settings to the printer, be sure to clear the check box.
2. Items
   When [Current Status] is selected, the current settings appear in the settings display / change area.
   Select the item for the settings that you want to change.
3. Menu Bar
   Select a command contained in each menu from the list.
   For details on the menu bar, see Menu Bar.
4. Printer
   Selects the printer whose settings are to be changed.
   If only one printer is connected, it is unnecessary to make a selection since only that printer will appear.
5. Node Name
   Displays the node name. The node name can also be changed. (See Tools menu.)
6. Settings Tabs
   Click the tab containing the settings to be specified or changed.
   If appears in the tab, the settings in that tab will not be applied to the printer.
7. Settings Display / Change Area
   Displays the current settings for the selected item. Change the settings as necessary using the drop-down menus, direct entry or other appropriate methods.
8. Refresh
   Click to update the displayed settings with the most recent information.
9. Exit
   Exits [Communication settings], and returns to the main window of [Printer Setting Tool].

   Settings are not applied to printers if [Exit] button is clicked without clicking [Apply] button after changing settings.

10. Apply
    Click [Apply] to apply the settings to the printer.
    To save the specified settings in a command file, select [Save in Command File] from the drop-down menu.

    Clicking [Apply] applies all settings in all tabs to the printer. If [Disable these settings] check box is selected, the settings in that tab are not applied.

     

Menu Bar

 

File menu

 

• Apply Settings to the Printer
  Applies the settings to the printer.

  If [Disable these settings] check box is selected, the settings in that tab are not saved.

• Save Settings in Command File
  Saves the specified settings in a command file.
  The file extension is “.bin”.
  • If [Disable these settings] check box is selected, the settings in that tab are not saved.
  • The following information is not saved with the settings commands.
    • Node name
    • IP address, subnet mask and default gateway (when the IP address is set to [STATIC])
  • The saved communication settings commands are only intended to be used for applying settings to a printer. The settings cannot be applied by importing this command file.
  • Saved command files contain authentication keys and passwords.
    Take necessary measures to protect saved command files, such as by saving them in a location that cannot be accessed by other users.
  • Do not send the command file to a printer whose model was not specified when the command file was exported.

 

• Import
  • Import from the current computer wireless settings
    Imports the settings from the computer.
    • Only personal security authentication settings (open system, public key authentication and WPA/WPA2-PSK) can be imported. Enterprise security authentication (such as LEAP and EAP-FAST) and WPA2-PSK (TKIP+AES) settings cannot be imported.
    • If multiple wireless LANs are enabled for the computer being used, the first wireless settings (only personal settings) that are detected will be considered for the import data.
    • Only settings (communication mode, SSID, authentication method, encryption mode and authentication key) from [Wireless LAN] tab - [Wireless Settings] pane can be imported.
  • Select a Profile to import
    Imports the exported file and applies the settings to a printer.
    Click [Browse] to display a dialog box for browsing for the file. Select the file to be imported. The settings in the selected file appear in the settings display / change area.
    • All settings, such as wireless settings or TCP/IP settings, can be imported. However, node names cannot be imported.
    • Only profiles that are compatible with the selected printer can be imported.
    • If the imported profile’s IP address is set to [STATIC], change the IP address of the imported profile, if necessary, so that it does not duplicate the IP address of an existing printer on the network whose settings have been completed.

• Export
  Saves the current settings in a file.
  • If [Disable these settings] check box is selected, the settings in that tab are not saved.
  • Exported files are not encrypted.

 

 

Tools menu

 

• Option Settings

   

  • Automatically restart the printer after applying new settings
    If this check box is selected, the printer automatically restarts after communication settings are applied.
    If this check box is cleared, printers must be manually restarted.

    When configuring multiple printers, you can reduce the time required to change settings by clearing this check box. In this case, we recommend selecting this check box when configuring the first printer so that you can confirm that each setting is operating as intended.

  • Automatically detects the connected printer, and retrieves the current settings.
    If this check box is selected and a printer is connected to the computer, the printer is automatically detected and the printer’s current settings are displayed in [Current Status] page.

    If the model of the connected printer is different than that of the printer shown in [Printer] drop-down list, the settings available on all tabs will change to match the connected printer.

• Change Node Name / Bluetooth Device Name
  Allows each node name to be changed.
• Reset to Default Communication Settings
  Returns the communication settings to their factory defaults.

 

Help menu

 

• Display Help
  Displays the Help.
• About
  Displays the version information.
   

 

General Tab

 

Communication settings

 

 

1. Network Settings on Power On
   Determines the conditions for connecting via Wi-Fi® when the printer is turned on. Select [On by Default], [Off by default] or [Keep Current State].
2. Selected Interface
   Select [Wireless LAN] or [Wireless Direct].
3. Bluetooth on Power On
   Determines the conditions for connecting via Bluetooth^® when the printer is turned on. Select [On by default], [Off by default] or [Keep Current State].

 

IPv6

 

 

1. IPv6 Usage
   Select [Enable] or [Disable].
2. Priority on IPv6 address
   Select to give priority to an IPv6 addresses.

 

Wireless LAN Tab

 

TCP/IP (Wireless)

 

 

1. Boot Method
   Select [AUTO], [BOOTP], [DHCP], [RARP] or [STATIC].
2. IP Address / Subnet Mask / Gateway
   Specify the various values.
   You can only enter settings when the IP address is set to [STATIC].
3. DNS Server Method
   Select [AUTO] or [STATIC].
4. Primary DNS Server IP Address / Secondary DNS Server IP Address
   You can only enter settings when the DNS server is set to [STATIC].

 

IPv6

 

 

1. Static IPv6 Address
   Specify the value.
2. Enable this address
   Select to make the specified static IPv6 address effective.
3. Primary DNS Server IPv6 Address / Secondary DNS Server IPv6 Address
   Specify the values.
4. IPv6 Address List
   Displays the list of IPv6 addresses.
    

Wireless Settings

 

 

1. Communication Mode
   Select [Ad-hoc] or [Infrastructure].
2. SSID (Network Name)
   Click [Search] button to display the SSID selections in a separate dialog box.
3. Channel
   Select from the displayed options.

   This setting is valid only in Ad-hoc mode.

4. Authentication Method / Encryption Mode
   The supported encryption modes for the various authentication methods are as shown in Communication Modes and Authentication Methods / Encryption Modes.
5. WEP Key
   You can only specify a setting when WEP is selected as the encryption mode.
6. Passphrase
   You can only specify a setting when WPA/WPA2-PSK is selected as the authentication method.
7. User ID / Password
   You can only specify settings when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client certificate must be registered. To register a certificate, connect to the printer from a web browser, and then specify the certificate.
8. Display the key and password on-screen
   If this check box is selected, keys and passwords will be displayed in plain text (non-encrypted text).
    

Communication Modes and Authentication Methods / Encryption Modes

 

• When [Communication Mode] is set to [Ad-hoc]

  Authentication Method	Encryption Mode
  Open System	None / WEP

   

• When [Communication Mode] is set to [Infrastructure]

  Authentication Method	Encryption Mode
  Open System	None / WEP
  Shared Key	WEP
  WPA/WPA2-PSK	TKIP+AES / AES
  LEAP	CKIP
  EAP-FAST/NONE	TKIP+AES / AES
  EAP-FAST/MS-CHAPv2	TKIP+AES / AES
  EAP-FAST/GTC	TKIP+AES / AES
  PEAP/MS-CHAPv2	TKIP+AES / AES
  PEAP/GTC	TKIP+AES / AES
  EAP-TTLS/CHAP	TKIP+AES / AES
  EAP-TTLS/MS-CHAP	TKIP+AES / AES
  EAP-TTLS/MS-CHAPv2	TKIP+AES / AES
  EAP-TTLS/PAP	TKIP+AES / AES
  EAP-TLS	TKIP+AES / AES

 

 

Wireless Direct Tab

 

Wireless Direct Settings

 

 

1. SSID / Network Key Generation
   Select [AUTO] or [STATIC].
2. SSID (Network Name) / Network Key
   Enter the SSID (25 ASCII characters or less) and the network key (63 characters or less) to be used in the Wireless Direct mode.
   You can only specify a setting when [STATIC] is selected as [SSID / Network Key Generation].
   The factory default SSID and password are as follows:

   SSID: “DIRECT-brRJ-3050[the last four digits of the serial number]” (for RJ-3050), "DIRECT-[the last five digits of the serial number]_RJ-3050Ai" (for RJ-3050Ai), “DIRECT-brRJ-3150[the last four digits of the serial number]” (for RJ-3150) or "DIRECT-[the last five digits of the serial number]_RJ-3150Ai" (for RJ-3150Ai).

   (You can find the serial number label on the bottom of the printer.)

   Password (Network key):

   RJ-3050/RJ-3150: 00000000
   RJ-3050Ai: 305[the last five digits of the serial number]
   RJ-3150Ai: 315[the last five digits of the serial number]

 

Bluetooth Tab

 

Bluetooth Settings

 

 

1. Visible to Other Devices
   Select whether the printer can be “discovered” by other Bluetooth devices.

   Available settings: [Discoverable], [Not Discoverable]

2. PIN code
   Specify the PIN code that will be used when pairing with devices that are compliant with Bluetooth 2.0 or earlier.

3. Display the PIN code on-screen
   If this check box is selected, PIN codes will be displayed in computer windows.

4. Request Secure Simple Pairing (SSP) settings during pairing
   If this check box is selected, pairing can be performed using the printer buttons for devices that are compliant with Bluetooth 2.1 or later.

 

Applying Setting Changes to Multiple Printers

 

1. After applying settings to the first printer, disconnect the printer from the computer, and then connect the second printer to the computer.
2. Select the newly connected printer from [Printer] drop-down box.

   If [Automatically detects the connected printer, and retrieves the current settings] check box in [Option Settings] dialog box is selected, the printer connected with the USB cable is automatically selected.
   For details, see File menu.

3. Click [Apply] button.
   The same settings that were applied to the first printer are applied to the second printer.

   If [Automatically restart the printer after applying new settings] check box is cleared, the printers will not be restarted after the settings are changed, reducing the time required to configure the printers. However, we recommend selecting [Automatically restart the printer after applying new settings] check box when configuring the first printer so that you can confirm that a connection with the access point can be correctly established with the settings. For details, see File menu.

4. Repeat steps 1 - 3 for all the printers whose settings you wish to change.
   • If the IP address is set to [STATIC], the printer’s IP address will also be changed to the same address as the first printer.
     Change the IP address if necessary.
   • To save the current settings in a file, click [File] - [Export].
     The same settings can be applied to another printer by clicking [File] - [Import], then selecting the exported settings file. (See File menu.)