SDX2250D
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
"The mat cannot be recognized. The mat will unload." message appearing on the LCD. What does it mean?
Possible Causes (or Results)
Case1 : |
The dotted marks on the part of the mat that is inserted are dirty. |
Case2 : |
The dotted marks on the part of the mat that is inserted are hidden by material that was attached. |
Case3 : |
The mat was inserted so that the side with the material attached is facing down. |
Case4 : |
The mat was inserted in the wrong direction. |
Case5 : |
The scanner glass is dirty. |
Case6 : |
A mat designed specifically for this machine is not used. |
Solutions
----- Case1 -----
Clean the dotted marks on the mat and their surrounding area.
![image image](/g/b/img/faqend/faqh00000757_001/as_ot/en/1889526/faqh690_fig002001.gif)
----- Case2 -----
Attach the material while keeping it within the adhesive area of the mat.
![image image](/g/b/img/faqend/faqh00000757_001/as_ot/en/1889527/faqh690_fig002002.gif)
----- Case3 -----
Insert the mat so that the side with the material attached is facing up.
----- Case4 -----
Insert the mat in the correct direction.
![image image](/g/b/img/faqend/faqh00000757_001/as_ot/en/1889528/faqh690_fig002003.gif)
----- Case5 -----
Clean the scanner glass inside the machine.
For details, see Cleaning the scanner glass.
----- Case6 -----
Replace the mat with one designed specifically for this machine.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
SDX1000, SDX1200, SDX1250, SDX2200D, SDX2250D, SDX900
Content Feedback
To help us improve our support, please provide your feedback below.