DC200
FAQs & Troubleshooting
There are deep cuts completely through the mat.
Possible Causes (or Results)
Case 1 : The blade extension from the blade holder is too much.
Case 2 : The cutting pressure (“Cut Pressure”) is incorrect.
For details on the appropriate blade extension and cutting pressure, see Mat and Material Combinations .
Solutions
Case1
Remove the holder from the carriage, and then adjust the blade extension.
>> For details, see Adjusting the Blade Extension .
(1) Turn to the left to decrease the blade extension.
(2) Turn to the right to increase the blade extension.
Case2
Adjust the setting for “Cut Pressure” in the pattern preview window of DesignNCut Manager.
For the computer users using a Wireless LAN connection, click here .
For the computer users using a USB cable, click here .
For the mobile device users, click here .
or
Adjust the setting for “Cut Pressure” in the settings of DesignNCut Manager.
For details, see About DesignNCut Manager .
If the cutting pressure is too high, the mat or blade tip may be damaged. Adjust it to an appropriate setting.
Adjustments to the cutting pressure will affect the finished product. Use the same material that the pattern will be cut on to make the adjustments.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Setup / Settings Maintenance Mat Pattern / Create / Edit Cutting Function Drawing Function Scanning Function Wireless Network Others Error Messages General Question Stamp Foil Pen Others General Question How to / Troubleshooting Error Messages Machine Accessories CanvasWorkspace General Question
Machine Setup / Settings Wireless Network Settings CanvasWorkspace Settings Others
Cleaning
General Question How to Troubleshooting
General Question How to
General Question How to Troubleshooting
Troubleshooting
General Question How to Troubleshooting
General Question Troubleshooting
How to Troubleshooting
List of Error Messages Error Message on Machine’s LCD Touchscreen Display Error Message / Code (E##### / N#####) Error Message / Code (ErrS## / NoteS##) Error Message (Others)
List of Error Messages Error Message / Code (E##### / N#####) Error Message / Code (ErrS## / NoteS##) Error Message (Others)
Mat Blade / Holder Support Sheet Pattern / Create / Edit Scanning Function Accessories / Consumables Others
General Question
General Information How to / Troubleshooting
General Information How to / Troubleshooting
How to / Troubleshooting
Support Sheet Blade / Holder Others
General Question
How to Troubleshooting
Introduction / How to
Introduction / How to
Introduction / How to