Check the value in the Number of jumps for trim box when the embroidery pattern design is exported as DST format in PE-DESIGN, and then check the specified number of jump codes on the embroidery machine of the PR series.

 How to find the numerical values on each of the settings screens

 When not cutting the upper and bobbin thread before the jump stitch

 When cutting the upper and bobbin thread before the jump stitch

 

• How to find the numerical values on each of the settings screens
  • Check the numerical value in the Number of jumps for trim box when the embroidery pattern design is exported as DST format in PE-DESIGN.
    
    
     
  • Check the numerical value in the number of jump codes on the embroidery machine of the PR series.
    
    
     

 top

• When not cutting the upper and bobbin thread before the jump stitch
  
  The thread trimming and "DST" setting can be specified from the second page of the settings screen on the embroidery machine of the PR series.
  Touch (or ) and select the desired setting.
  In either of the following cases, it will not be cut the upper and bobbin thread before the jump stitch.
  • Select "OFF" and the key appears as .
    
    
     
  • Select "ON" and the key appears as .
    
    
    
    Change the following numerical values on each of the settings screens.
    Select the appropriate value, making sure that it meets the following conditions.
    

    The numerical value in the Number of jumps for trim box when the embroidery pattern design is exported as the DST format in PE-DESIGN

    The numerical value in the number of jump codes on the embroidery machine of the PR series

    For example, if the Number of jumps for trim box in PE-DESIGN is set to "7" and the number of jump codes on the embroidery machine is set to "8", it will not be cut the upper and bobbin thread before the jump stitch.

     

 top

• When cutting the upper and bobbin thread before the jump stitch
  
  The thread trimming and "DST" setting can be specified from the second page of the settings screen on the embroidery machine of the PR series.
  Select "ON" and the key appears as .
  
  
  
  Change the following numerical values on each of the settings screens.
  Select the appropriate value, making sure that it meets the following conditions.
  

  The numerical value in the Number of jumps for trim box when the embroidery pattern design is exported as the DST format in PE-DESIGN

  The numerical value in the number of jump codes on the embroidery machine of the PR series

  For example, if the Number of jumps for trim box in PE-DESIGN is set to "8" and the number of jump codes on the embroidery machine is set to "8", it will be cut the upper and bobbin thread before the jump stitch.