DCP-J1200W(XL)

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 27/05/2021
  • ID: faq00003017_514

Copy an ID Card

Use the 2 in 1 ID feature to copy both sides of an identification card onto one page, keeping the original card size.
image
  • Make sure the paper size is set to A4 or Letter.
  • You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
  1. Place your identification card face down near the lower-right corner of the scanner glass as shown.
    2 in 1 ID (Vertical) 2 in 1 ID (Horizontal)

    image

    image
    1. 3 mm or greater (bottom, right)
    2. 145 mm
    3. 2 in 1 ID (Vertical): 207 mm

      2 in 1 ID (Horizontal): 102 mm

    4. Scannable area
  2. Start Brother Mobile Connect on your mobile device.
  3. Tap Copy.
  4. Select the 2in1 ID Vertical or 2in1 ID Horizontal option from the Page Layout list.
  5. Tap Copy.
    The machine starts scanning one side of the identification card.
  6. After the machine has scanned the first side, the Power LED blinks slowly. Turn over the identification card and tap Continue to scan the other side.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J1200W(XL)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit