MFC-7840W

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 09/11/2011
  • ID: faq00002647_000

When I send a fax from the machine, an error "not register." or "not registered." is displayed.

The "Fax to server" may be "ON" and this may cause the problem.
To solve the problem make sure that "Fax to server" is "OFF".
There are two ways to change the settings of "Fax to server": By using the control panel and by using the Web Based Management.

Please choose the appropriate way and use the following steps below.

 

Method1: using the control panel

  1. Press Menu.
  2. Select LAN or Network and Fax to Server.
  3. Select Off and then press OK.
  4. Press Stop/Exit.

 

Method2: using the Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP address).
    - For example: http://192.168.1.2/
  3. Click I-Fax Settings and Fax to Server.
  4. Select Off.

    Web Based Management screen

  5. Click Submit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9055CDN, MFC-7440N, MFC-7460DN, MFC-7840N, MFC-7840W, MFC-7860DN, MFC-7860DW, MFC-8860DN, MFC-8880DN, MFC-8890DW, MFC-9120CN, MFC-9125CN, MFC-9320CW, MFC-9325CW, MFC-9460CDN, MFC-9840CDW, MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit