MFC-L5755DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Copy on Both Sides of the Paper (2-sided Copy)

Reduce the amount of paper you use by copying onto both sides of the paper.
  • You must choose a 2-sided copy layout from the following options before you can start 2-sided copying.
  • The layout of your original document determines which 2-sided copy layout you should choose.
  • To use the automatic 2-sided copy feature, you must load your document in the ADF.
  • When you manually make 2 sided copies from a 2-sided document, use the scanner glass.
  • (For models without the lever on the 2-sided tray) Select A4 sized paper when using the 2‑sided copy option.
  • (For models with the lever on the 2-sided tray) Select A4, Letter, Legal, Mexico Legal, India Legal or Folio sized paper when using the 2‑sided copy option.
  • Make sure the 2-sided tray is set to the correct paper size. If it is not, the paper may not be fed correctly, resulting in a skewed printout or a paper jam.
Portrait
2–sided to 2–sided
1–sided to 2–sided (Long Edge Flip)
1–sided to 2–sided (Short Edge Flip)
Landscape
2–sided to 2–sided
1–sided to 2–sided (Long Edge Flip)
1–sided to 2–sided (Short Edge Flip)
  1. Load your document.
  2. Press [Copy].
  3. Enter the number of copies.
  4. Press [Options]>[2-sided Copy].
  5. Do one of the following:
    • (MFC-L5755DW/MFC-L5900DW/MFC-L6700DW/MFC-L6900DW)

      To make 2-sided copies of a 2-sided document automatically, press [2-sided⇒2-sided].

      Load your document in the ADF to use the automatic 2-sided copy feature.
    • (MFC-L5700DN)

      To make 2-sided copies of a 2-sided document manually, press [2-sided⇒2-sided].

      Use the scanner glass to make 2-sided copies of a 2-sided document manually.
    • To make 2-sided copies from a 1-sided document, follow these steps:

      1. To change the layout options, press [Layout], and then press [Long Edge Flip] or [Short Edge Flip].
      2. Press [1-sided⇒2-sided].
  6. When finished, press [OK].
  7. Press [Start].

    If you placed the document in the ADF, the machine scans the pages and starts printing.

  8. If you are using the scanner glass, repeat the following steps for each page of the document:
    • For a 2-sided document, turn the sheet over along the long edge to scan the other side.

    • Place the next page on the scanner glass, and then press [Continue] to scan the page.
    • After scanning all the pages, press [Finish].

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-L5500D, DCP-L5600DN, MFC-L5700DN, MFC-L5755DW, MFC-L5900DW, MFC-L6700DW, MFC-L6900DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.