DCP-9040CN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 26/03/2009
  • ID: faq00002577_000

I'm using Mac OS X 10.5. When trying to scan using the Brother ControlCenter2 with the USB interface, the ControlCenter2 screen will close. What should I do?

To solve this issue, you must remove the existing drivers and then download and install the updated scanner driver by following the steps below:

  1. Turn off your Brother machine.
  2. Select MacintoshHD => Library => Image Capture to open the Twain Data Sources folder.


  3. Drag the Brother TWAIN.ds to the trash can.


  4. Turn on your Brother machine.
  5. Click here to download and install the latest "Scanner Driver".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-115C, DCP-116C, DCP-120C, DCP-130C, DCP-135C, DCP-150C, DCP-155C, DCP-330C, DCP-350C, DCP-540CN, DCP-560CN, DCP-7010, DCP-7010L, DCP-7025, DCP-8020, DCP-8025D, DCP-8040, DCP-8045D, DCP-8060, DCP-8065DN, DCP-9040CN, MFC-210C, MFC-215C, MFC-230C, MFC-235C, MFC-240C, MFC-260C, MFC-265C, MFC-3100C, MFC-3220C, MFC-3240C, MFC-3360C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-4800, MFC-5100C, MFC-5200C, MFC-5440CN, MFC-5460CN, MFC-5840CN, MFC-5860CN, MFC-620CN, MFC-640CW, MFC-665CW, MFC-685CW, MFC-7220, MFC-7225N, MFC-7420, MFC-7820N, MFC-8220, MFC-8440, MFC-8460N, MFC-8820D, MFC-8840D, MFC-8840DN, MFC-885CW, MFC-8860DN, MFC-9160, MFC-9180, MFC-9420CN, MFC-9440CN, MFC-9660, MFC-9840CDW, MFC-9880

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit