HL-1650
 |
FAQs & Troubleshooting |
What kind of Control Panel Setting Menu available and what do they mean?
We named the Paper tray in this manual and LCD panel as shown below:
| Upper paper tray | Tray 1 |
| Multi-purpose tray | MP tray |
| Optional lower tray | Tray 2 |
There are 8 modes. For more information about the selections available for each mode, refer to the pages listed below.
INFORMATION
| Setting Menu | Description | |
| PRINT SETTINGS | Print the Configuration page. | |
| PRINT TEST | Print the test page. | |
| RRINT DEMO | Print the demonstration. | |
| PRINT FILE LIST | Print the file list. | |
| PRINT FONTS | Print the font list and samples. | |
| VERSION | Sub-Setting Menu | Description |
| SER.NO=######### | Printer serial number. | |
| ROM VER=#### | ROM firmware version (only Network users) | |
| ROM DATE ##/##/## | ROM date (only Network users) | |
| NET VER=#### | Network firmware version | |
| NET DATE ##/##/## | Network date | |
| RAM SIZE=###MB | The size of memory in this printer. | |
| MAINTENANCE | PAGE COUNTER | =###### |
| REMAIN DRUM | =###### | |
| REMAIN PF KIT1 | =###### | |
| REMAIN PF KIT2 | =###### | |
| REMAIN FUSER | =###### | |
| REMAIN LASER | =###### | |
PAPER
| Setting Menu | Description |
| SOURCE | =AUTO / MP TRAY /TRAY1 / TRAY2 |
| MP FIRST | =OFF/ON Feed paper from the MP tray first. |
| MANUAL FEED | =OFF/ON |
| DUPLEX | =OFF/ON(LONG BIND)/ON(SHORT BIND) |
QUALITY
| Setting Menu | Description |
| RESOLUTION | =300/600/HQ1200 You can choose a print resolution of 300, 600 or HQ1200. |
| HRC | =OFF/LIGHT/MEDIUM/DARK HRC: High Resolution Control offers improved print quality of characters and graphics that conventional laser printers cannot attain with a resolution of 300 or 600 dpi. |
| TONER SAVE | =OFF/ON |
| DENSITY | =-6:0:6 Increase or decrease the print density. |
PRINT MENU
| Setting Menu | Description | |
| MEDIA TYPE | =PLAIN PAPER/TRANSPARENCIES/THIN PAPER/THICK PAPER/THICKER PAPER/BOND PAPER | |
| PAPER | Set cut sheet paper size to LETTER, LEGAL, A4, A5, A6, B5, B6, EXECUTIVE, COM10, MONARCH, C5 and DL | |
| COPIES | =1:999 Shows the number of printed pages. | |
| ORIENTATION | =PORTRAIT/LANDSCAPE This printer can print pages in portrait or landscape orientation. | |
| PRINT POSITION | This printer can be adjusted to correct the page format. | |
| Sub-Setting Menu | Description | |
| X OFFSET=0 | Move the print start position (at the upper left corner of pages) horizontally up to ?500 (left) to +500 (right) dots in 300 dpi units?. | |
| Y OFFSET=0 | Move the print start position (at the upper left corner of pages) vertically up to ?500 (up) to +500 (down) dots in 300 dpi units. | |
| AUTO FF=OFF | =OFF/1:5:99 (sec) Allows you to print the remaining data without pressing the Go switch. | |
| FF SUPPRESS | =OFF/ON Turn on/off the form feed suppress function. | |
|
HP LASERJET |
FONT NO. | =I0000:????? |
| FONT PITCH/POINT | =???.?? | |
| SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set or the character set. | |
| TABLE PRINT | Print code table. | |
| AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF, OFF: CR§ÂCR | |
| AUTO CR=OFF | =OFF/ON ON: LF§ÂLF+CR, FF+CR, or VT§ÂVT+CR OFF: LF§ÂLF, FF§ÂFF, or VT§ÂVT | |
| AUTO WRAP=OFF | =OFF/ON Line feed and carriage return occur when the printer reaches the right margin. | |
| AUTO SKIP=ON | =ON/OFF line feed and carriage return occur when the printer position reaches the bottom margin. | |
| LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
| RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
| TOP MARGIN | =#### Set the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.5 | |
| BOTTOM MARGIN | =#### Set the bottom margin at a distance from the bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting: 0.33(None-HP), 0.5(HP) | |
| LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
| EPSON FX-850 | FONT NO. | =I0000:????? |
| FONT PITCH/POINT | =???.?? | |
| SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set or the character set. | |
| TABLE PRINT | Print code table. | |
| AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF OFF: CR§ÂCR | |
| AUTO MASK | =OFF/ON | |
| LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
| RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
| TOP MARGIN | =#### Set the top margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
| BOTTOM MARGIN | =#### Set the bottom margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
| LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
| IBM PROPRINTER | FONT NO. | =I0000:????? |
| FONT PITCH/POINT | =???.?? | |
| SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set and the character set. | |
| TABLE PRINT | Print code table. | |
| AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF, OFF: CR§ÂCR | |
| AUTO CR=OFF | =OFF/ON | |
| LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
| RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
| TOP MARGIN | =#### Set the top margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
| BOTTOM MARGIN | =#### Set the bottom margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
| LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
| BR-SCRIPT | ERROR PRINT | =OFF/ON |
| APT | =OFF/ON APT: Advanced Photoscale Technology offers photographic fine grayscale on graphics. APT setting is available only at 600 dpi. | |
NETWORK
| Setting Menu | Description | |
| TCP/IP | Sub-Setting Menu | Description |
| TCP/IP ENABLE | =ON/OFF | |
| IP ADDRESS= | ###.###.###.### | |
| SUBNET MASK= | ###.###.###.### | |
| GATEWAY= | ###.###.###.### | |
| IP BOOT TRIES | =# | |
| IP METHOD | =AUTO/STATIC/RARP/BOOTP/DHCP | |
| NETWARE | NETWARE ENABLE | =ON/OFF |
| NET FRAME | =AUTO/8023/ENET/8022/SNAP | |
| APPLETALK | =ON/OFF | |
| NETBEUI | =ON/OFF | |
| DLC/LLC | =ON/OFF | |
| BANYAN | =ON/OFF | |
| LAT | =ON/OFF | |
| NETBIOS/IP | =ON/OFF | |
| ENET | =AUTO/100B-FD/100B-HD/10B-FD/10B-HD | |
INTERFACE
| Setting Menu | Description | |
| AUTO IF TIME |
= 1:5:99 (sec) You must set the timeout period for the auto interface selection. | |
| INPUT BUFFER |
= Level1:5:15 Increase or decrease the input buffer capacity. |
RESTART PRINTER? |
| PARALLEL | When using the parallel interface | |
| Sub-setting Menu | Description | |
| HIGH SPEED |
=ON/OFF Turns the high speed parallel communications ON/OFF. | |
| BI-DIR=ON/OFF |
=ON/OFF Turns the bi-directional parallel communications ON/OFF. | |
RESET MENU
| Setting Menu | Description |
| RESET PRINTER | Resets the printer and restores all printer settings - including command settings - to settings you have previously made with the control panel switches. |
| FACTORY RESET | Resets the printer and restores all printer settings - including command settings - to the factory settings. |
Content Feedback
To help us improve our support, please provide your feedback below.
