Model discontinued. This page is no longer updated.

MFC-5860CN

FAQs & Troubleshooting

FAQs & Troubleshooting

Can I reduce the size of a received fax to fit the size of the paper in the Brother machine?


  • Turning on Auto Reduction will automatically reduce the size of an incoming fax to fit the size of the paper in your machine. To set Auto Reduction mode ON, follow the instructions listed below:
  1. If the FAX mode key is not illuminated, press it.
  2. Press Menu on the control panel.
  3. Press the up or down navigation key until Fax appears on the LCD and press OK.
  4. Press the up or down navigation key until Setup Receive appears and press OK.
  5. Press the up or down navigation key until Auto Reduction appears and press OK.
  6. Press the up or down navigation key until ON (or OFF) appears and  press OK.
  7. Press Stop/Exit.
  • The machine calculates the reduction ratio by using the page size of the fax and the Paper Size setting.
    Verify the Paper Size is set correctly by follow the instructions listed below:
  1. Press Menu.
  2. Press the up or down navigation key until General Setup appears on the LCD and press OK.
  3. Press the up or down navigation key until Paper Size appears and press OK.
  4. Press the up or down navigation key to choose the tray and press OK.
  5. Press the up or down navigation key to select the correct size and press OK.
  6. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-5860CN, MFC-8460N, MFC-8860DN, MFC-9440CN, MFC-9450CDN, MFC-9840CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.