HL-L8360CDW

FAQs & Troubleshooting

Unpack your Brother machine

Follow the steps below to unpack the machine:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

Open the box.
Remove the power cord.
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
Remove the package containing printed materials.
Remove the packing foam.
Pull the machine out of the box.

To prevent possible injuries, at least two people should lift the machine.
Remove the plastic bag.
Peel off all blue tape.
Open the front cover.
Pull out the drum unit and toner cartridge assembly.
Remove all the orange packing material from the drum unit and toner cartridge assembly.
Peel off all blue tape.
Make sure you remove all the orange packing material from the drum unit and toner cartridge assembly.
Push the drum unit and toner cartridge assembly back into the machine.
Close the front cover.
Peel the blue tape from the paper support flap.
Pull the paper tray out of the machine.
Remove the blue tape, the silica gel pack, and all paper from the paper tray.
Push the paper tray completely into the machine.