PT-2700
FAQs & Troubleshooting
My label is not cut automatically after printed.
Check if "Cut Option" is set to "Chain" or "No Cut", or "Manual Cutting" is ON.
Check the Cut Option, or hold down
Ensure that the "Manual Cutting" is OFF.
Set the "Manual Cutting" OFF and select "Large Margin" or "Small Margin" to cut labels automatically.
If your question was not answered, have you checked other FAQs?
Have you checked manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Installation Machine Setup Connecting to a Computer P-touch Editor (Windows) P-touch Editor (Mac) Printing Software Machine Operating System Installation Software P-touch Editor (Windows) P-touch Editor (Mac) Error Messages/LED Indications Connecting to a Computer Printing Uninstallation Machine Operating System Specifications
General Setup Procedures USB Numbering Barcodes Layout Add-ins Templates Printing Using the Software Databases
Numbering Barcodes Layout Templates Using the Software Databases
Print Quality/Print Settings Reduce Tape Margins Layout Barcodes
Printer Driver Reset Procedure Operations
Mac Windows Printer Driver P-touch Transfer Manager (Windows only) P-touch Library Print Quality Media Databases Add-ins Barcodes Error Messages Operations Cannot Print
Operations Cannot Print Print Quality Error Messages Databases
Error Messages on the Machine's Display Error Messages on your Computer's Screen Installation Failure Cannot Print Cannot Print Print Quality/Print Settings
Reduce Tape Margins Layout Cannot Cut
Paper/Tape/Label Jam
Machine Screen Display Power Supply Reset Procedure
Operations
Product Application Consumables&Accessories Printer Driver Software
Software Mac
Windows
and press 
to feed and cut the tape.
