SDX1200
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
Care and Maintenance (Cleaning the Trimmer Blade)
Roll feeder is sold saperately.
If material debris, lint or dust accumulates inside the trimmer blade, it may no longer cut material. Periodically clean the trimmer blade.
Do not disassemble the trimmer blade.
Remove the trimmer blade from the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/ae/en/2161155/faqh323_fig00004.gif) |
(1) Stopper |
-
Lightly push back on the stopper at the left end of the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/ae/en/2161156/faqh323_fig00002.gif) |
(1) Stopper |
Do not push on the stopper with force. Otherwise, damage may result.
-
Slide the trimmer blade to the left end to remove it from the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/ae/en/2161157/faqh323_fig00003.gif)
-
Using a commercially available brush, clean off debris, lint and dust.
![image image](/g/b/img/faqend/faqh00101331_000/ae/en/2161154/faqh323_fig00001.gif)
-
Install the trimmer blade onto the trimmer.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.