How to select the "Eco Mode" or "Shutoff Support Mode" ?

You can save the machine power by setting the eco mode or the shutoff support mode.
If you leave the machine without using for a specified period of time, the machine enters in one of these modes.

 

Eco Mode

Machine will enter a sleep mode. Touch the screen or "Start/Stop" button to continue embroidering.

 

Shutoff Support Mode

Machine will turn off after set period of time. Turn machine off and then back on to restart embroidering.

 

Condition Eco Mode Shutoff Support Mode
Available time OFF, 0 - 120 (minute) OFF, 1 - 12 (hour)
"Start/Stop" button Green flashing Green slow flashing
Suspended function Machine light, Screen display, LED pointer All functions
After recovering The machine starts from the previous operation. You need to turn off the machine.

 

Press the "Start/Stop" button or touch the screen display to recover from these modes.

These settings can be specified from page 3 of the settings screen.

 

  1. Use or to select the time until entering the mode.

     

    image

    If you turn off the machine while the machine is in the "Eco Mode" or the "Shutoff Support Mode", wait for about 5 seconds before turning on the machine again.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

VR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.