Innov-is M370

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I remove or attach the Embroidery foot ?

Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury.

 

  1. Press img01 (Needle position button) to raise the needle.


     
  2. Press img02 .
    >>The screen changes, and all keys and operation buttons are locked (except img03 ).
    img04

     
  3. Raise the presser foot lever.
    img05


     
  4. Press the black button at the back of the presser foot holder in order to remove the presser foot.
    img06 (1) Black button
    (2) Presser foot holder


     
  5. Use the screwdriver to loosen the presser foot holder screw.
    Turn the screw toward the back of the machine (counterclockwise).
    The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver.
    img07



     
  6. Hold the embroidery foot “Q” with your right hand, as shown.
    Hold the embroidery foot with your index finger wrapped around the lever at the back of the foot.
    img08 (1) Lever
    (2) Embroidery foot bar


     
  7. While pressing in the lever on embroidery foot “Q” with your finger, fit the embroidery foot bar over the needle clamp screw.
    img09 (1) Embroidery foot bar
    (2) Needle clamp screw
    (3) Presser bar


     
  8. Secure embroidery foot “Q” with the presser foot holder screw, making sure that embroidery foot “Q” is vertical.
    img10 (1) Mounting notch
    (2) Presser foot holder screw


     
  9. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw.
    img11
     

    Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot and possibly cause injury.




     
  10. Press img12 to unlock all keys and buttons.
    img13


     

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is M370, Innov-is NV180

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.