If "NEEDLE POSITION" in the machine settings screen is set to the raised position, the pivot function cannot be used. In that case, the key appears as a dotted line and is not available.
In the following procedures, please change setting.
Press .
On the machine settings screen, select for the "NEEDLE POSITION".
When the setting is selected, the pivot function can only be used with stitches where presser foot J, N, C or O is indicated in the upper-left corner of the screen.
If any other stitch is selected, the key appears as a dotted line and is not available.
Please change the stitch.
If your question was not answered, have you checked other FAQs?
.
for the "NEEDLE POSITION".
