MFC-1910W

FAQs & Troubleshooting

FAQs & Troubleshooting

Access Web Based Management

The default login password to manage machine settings is either:

  • the password located on the back or bottom of the machine preceded by "Pwd"
    OR
  • initpass

We recommend you change it to protect your machine from unauthorized access.

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:
    http://192.168.1.2
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
      - For example:
        http://SharedPrinter
      If you enable a NetBIOS name, you can also use the node name.
      - For example:
        http://[node name]
      The NetBIOS name can be found in the Network Configuration Report.
    • For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
  3. If the machine prompts you for a password, type it, and then click Right Arrow.
    If you have not previously set your own password, type the default login password above.

    You can now change the print server settings.
    If you change the protocol settings, you must restart the machine after clicking Submit to activate the configuration.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1610W, MFC-1910W, MFC-1915W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.