MFC-L2715DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Copy an ID Card

  • You may copy an identification card only to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. (For MFC models)
    Press (COPY).
  2. Place an identification card face down near the upper left corner of the scanner glass.

    1     4.0 mm or greater (top, left)

  3. Press 2 in 1 (ID) Copy.
  4. Do one of the following:
    • For MFC models

      Use the dial pad to enter the number of copies you want.

    • For DCP models

      Press or to enter the number of copies you want.

  5. Press Start.
    The machine scans one side of the identification card.
  6. After the machine has scanned the first side, turn over the identification card.
  7. Press Start to scan the other side.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Place your identification card face down near the upper left corner of the scanner glass.

    1             4.0 mm or greater (top, left)

  2. Press [Copy]>[2 in 1 ID Copy].
  3. Enter the number of copies.
  4. Press [Start].
    The machine scans one side of the identification card.
  5. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-L2535D , DCP-L2550DW, MFC-L2715DW, MFC-L2750DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.