HL-1850
 |
FAQs & Troubleshooting |
What kind of Control Panel Setting Menu available and what do they mean?
We named the Paper tray in this manual and LCD panel as shown below:
| Upper paper tray | Tray 1 |
| Multi-purpose tray | MP tray |
| Optional lower tray | Tray 2 |
There are 8 modes. For more information about the selections available for each mode, refer to the pages listed below.
INFORMATION
| Setting Menu | Description | |
| PRINT SETTINGS | Print the Configuration page. | |
| PRINT TEST | Print the test page. | |
| RRINT DEMO | Print the demonstration. | |
| PRINT FILE LIST | Print the file list. | |
| PRINT FONTS | Print the font list and samples. | |
| VERSION | Sub-Setting Menu | Description |
| SER.NO=######### | Printer serial number. | |
| ROM VER=#### | ROM firmware version (only Network users) | |
| ROM DATE ##/##/## | ROM date (only Network users) | |
| NET VER=#### | Network firmware version | |
| NET DATE ##/##/## | Network date | |
| RAM SIZE=###MB | The size of memory in this printer. | |
| MAINTENANCE | PAGE COUNTER | =###### |
| REMAIN DRUM | =###### | |
| REMAIN PF KIT1 | =###### | |
| REMAIN PF KIT2 | =###### | |
| REMAIN FUSER | =###### | |
| REMAIN LASER | =###### | |
PAPER
| Setting Menu | Description |
| SOURCE | =AUTO / MP TRAY /TRAY1 / TRAY2 |
| TRAY PRIORITY | =MP>T1>T2 / T1>T2>MP |
| MP FIRST | =OFF/ON Feed paper from the MP tray first. |
| MP SIZE | =ANY /LETTER/LEGAL/A4/.... |
| MANUAL FEED | =OFF/ON |
| TRAY1 SIZE | =ANY/LETTER/LEGAL/A4/.... |
| TRAY2 SIZE | =ANY/LETTER/LEGAL/A4/ |
| DUPLEX | =OFF/ON(LONG BIND)/ON(SHORT BIND) |
QUALITY
| Setting Menu | Description |
| RESOLUTION | =300/600/HQ1200 You can choose a print resolution of 300, 600 or HQ1200. |
| HRC | =OFF/LIGHT/MEDIUM/DARK HRC: High Resolution Control offers improved print quality of characters and graphics that conventional laser printers cannot attain with a resolution of 300 or 600 dpi. |
| TONER SAVE | =OFF/ON |
| DENSITY | =-6:0:6 Increase or decrease the print density. |
PRINT MENU
| Setting Menu | Description | |
| MEDIA TYPE | =PLAIN PAPER/TRANSPARENCIES/THIN PAPER/.... | |
| PAPER | Set cut sheet paper size to LETTER, LEGAL, A4,.... | |
| COPIES | =1:999 Shows the number of printed pages. | |
| ORIENTATION | =PORTRAIT/LANDSCAPE This printer can print pages in portrait or landscape orientation. | |
| PRINT POSITION | This printer can be adjusted to correct the page format. | |
| Sub-Setting Menu | Description | |
| X OFFSET=0 | Move the print start position (at the upper left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi units?. | |
| Y OFFSET=0 | Move the print start position (at the upper left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi units. | |
| AUTO FF=OFF | =OFF/1:5:99 (sec) Allows you to print the remaining data without pressing the Go switch. | |
| FF SUPPRESS | =OFF/ON Turn the form feed suppress function on/off. | |
NETWORK
| Setting Menu | Description | |
| TCP/IP | Sub-Setting Menu | Description |
| TCP/IP ENABLE | =ON/OFF | |
| IP ADDRESS= | ###.###.###.### | |
| SUBNET MASK= | ###.###.###.### | |
| GATEWAY= | ###.###.###.### | |
| IP BOOT TRIES | =# | |
| IP METHOD | =AUTO/STATIC/RARP/BOOTP/DHCP | |
| NETWARE | NETWARE ENABLE | =ON/OFF |
| NET FRAME | =AUTO/8023/ENET/8022/SNAP | |
| APPLETALK | =ON/OFF | |
| NETBEUI | =ON/OFF | |
| DLC/LLC | =ON/OFF | |
| BANYAN | =ON/OFF | |
| LAT | =ON/OFF | |
| NETBIOS/IP | =ON/OFF | |
| ENET | =AUTO/100B-FD/100B-HD/10B-FD/10B-HD | |
INTERFACE
| Setting Menu | Description | |
| AUTO IF TIME |
= 1:5:99 (sec) You must set the timeout period for the auto interface selection. | |
| INPUT BUFFER |
= Level1:5:15 Increase or decrease the input buffer capacity. |
RESTART PRINTER? |
| PARALLEL | When using the parallel interface | |
| Sub-setting Menu | Description | |
| HIGH SPEED |
=ON/OFF Turns the high speed parallel communications ON/OFF. | |
| BI-DIR=ON/OFF |
=ON/OFF Turns the bi-directional parallel communications ON/OFF. | |
RESET MENU
| Setting Menu | Description |
| RESET PRINTER | Resets the printer and restores all printer settings - including command settings - to settings you have previously made with the control panel switches. |
| FACTORY RESET | Resets the printer and restores all printer settings - including command settings - to the factory settings. |
Content Feedback
To help us improve our support, please provide your feedback below.
