FAX-2950

FAQs & Troubleshooting

FAQs & Troubleshooting

Out of Memory

Check the solution applicable for your case:

 

Case 1: Copy operation in progress

Do one of the following:

  • Press Start to copy the scanned pages.

  • Press Stop/Exit and wait until the other operations in progress finish, and then try again.



Case 2: Fax operation in progress (for applicable machines)


Do one of the following:

  • Press Start to send the scanned pages.

  • Press Stop/Exit and wait until the other operations in progress finish, and then try again.

  • Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. You can print a fax in the memory by pressing the Menu key and choosing FAX => Remote Fax Opt => Print Fax or Print Document.

    Then turn off Fax Storage to avoid storing more faxes in the memory. You can turn off Fax Storage by pressing the Menu key and choosing FAX =>Remote Fax Opt =>Fwd/Page/Store or Forward/Store =>Off.




Case 3: Print operation in process (for applicable machines)


Do one of the following:

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7065DN, FAX-2840, FAX-2950, MFC-7360, MFC-7470D, MFC-7860DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.