Model discontinued. This page is no longer updated.

MFC-9420CN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I change the length of time the machine will wait until it goes into Sleep Mode?

You can choose how long the machine is idle (from 00 to 99 minutes) before it goes into sleep mode. The factory setting is 30 minutes. Follow the steps listed below to change the setting.

 

 

  1. Press the Menu/Set key.
  2. Press the up or down navigation key to select General Setup and press Menu/Set.
  3. Press the up or down navigation key to select Ecology and press Menu/Set.
  4. Press the up or down navigation key to select Sleep Time and press Menu/Set.
  5. Use the dial pad to enter the length of time the machine is idle before it goes into sleep mode (00 to 99).
  6. Press Menu/Set.
  7. Press Stop/Exit.
  • If you want to turn off sleep mode, press Start (either Black or Color) and Options simultaneously in Step 2.
  • If the machine is in Sleep Mode when you change the Sleep Time, the new setting will take effect the next time the machine copies, prints or is turned off and on.
 
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-9420CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.