Model discontinued. This page is no longer updated.

HL-4200CN

FAQs & Troubleshooting

FAQs & Troubleshooting

The print quality is not good when using the 2-sided(duplex) printing function.

If the following print quality problems occur, change the settings according to the type of media being used: white spots apear, the toner is scattered, the output is blurred or the output looks blue.

 

If white spots appear or the print result is blurred, adjust the Media Current Adj. up to -20.


If the print looks blue or has toner scatter, adjust the Media Current Adj. up to +30.

 

 

To change the settings, follow the instructions below.


  1. Press the Menu button. The menu screen will appear.
    "Menu 1:System"
  2. Press the lower arrow button once.
    "Menu 2:Maintenance"
  3. Press the Form Feed/Set or the right arrow button once.
    "2:Maintenance Init NVM"
  4. Press the lower arrow button 3 times.
    "2:Maintenance Media CurrentAdj"
  5. Press the Form Feed/Set or the right arrow button once.
  6. Select the type of media using the lower arrow button.
  7. Press the Form Feed/Set or the right arrow button once.
  8. Enter the value using the upper or lower arrow button and press Form Feed/Set to save the value.
    i.e) "Plain Paper 2 *"
  9. Press the Menu button to exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4200CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.