Update software

Update Information   |   To check the software version   |   To update the software

Update Information

Version 1.30 (November 2021)

• The optional magnetic frame (SAMF180/MF180/MF180AP) can be recognized on the machine.
   

How to check the software version of your machine

1. Press the power switch to "|" to turn on your machine.
    

    

2. Press (Settings key) to display the machine's settings screen.

   
    

    

3. Switch the settings screens by using (Previous page key) or (Next page key) to display the machine's program version.

    

   

    

    

4. If "Version" shown in the screen is already "1.30" or later, it is not necessary to update your machine with the software on this page.

How to update your machine's software

You can update the machine's software using a USB flash drive.
After downloading the file, update the machine's software according to the following procedure.

1. Insert the USB flash drive into the USB port on the computer.

    

   

    

   (1) USB port on the computer       (2) USB flash drive

   
   
    

2. The “Removable Disk” icon appears in “Computer (My computer)” on the computer.

    

   

   
   
    

3. Copy the update file to “Removable Disk”.

    

   

   
    
    

4. Safely remove the USB flash drive from the USB port on the computer.

    

   

    

   (1) USB port on the computer       (2) USB flash drive

   
    

5. Turn on the machine while pressing and holding (Presser foot lifter button).

   
    

    

   The following screen appears on the LCD.

    

   

   
    

    

6. Insert the USB flash drive into the USB port on the machine.

    

   

    

   (1) USB port                (2) USB flash drive

   When using USB flash drive equipped with an access indicator, the access indicator will begin flashing after the media is inserted into your machine, and may take about 5 to 6 seconds before the media is recognized.
   (The length of time varies depending on the USB flash drive.)

    

7. Press (Load key).
   The following screen appears on the LCD.

    

   

   • Do not turn off your machine while the machine is saving the update software to itself.
   • If an error occurred, a text error message will appear. At this time, turn the machine off, and then start the procedure again from step 5.

   
    

8. When the following screen appears, updating is completed.

    

   
   
    

    

9. Remove the USB flash drive, and turn the machine off and on again.

   
    

10. The machine's software has been updated.