Nedladdningar
![]() |
Uppdatera program |
Introduction | To check the software version | To update the software
This software update will provide the following changes:
Version 2.11 (March 2024)
You can update your machine's software using a USB flash drive.
Follow the instructions below to install the software.
When using a USB flash drive to update the software, check that no data other than the update file is saved on the USB flash drive being used before starting to update.
(1) USB port on the computer (2) USB flash drive
When using a USB flash drive equipped with an access lamp, the access lamp will begin flashing after the USB flash drive is inserted into your computer, and may take about 5 to 6 seconds before the USB flash drive is recognized. (The length of time varies depending on the USB flash drive.)
The USB flash drive should only contain the update file.
(1) USB port on the computer (2) USB flash drive
(1) | ![]() |
Press this key to load the program file from the USB flash drive plugged into the USB port for media |
(2) | ![]() |
Press this key to load the program file from the USB flash drive plugged into the USB port for mouse |
(1) USB port for media (2) USB port for mouse (3) USB flash drive
When using USB flash drive equipped with an access lamp, the access lamp will begin flashing after the USB flash drive is inserted into your machine, and may take about 5 to 6 seconds before the USB flash drive is recognized. (The length of time varies depending on the USB flash drive.)
Do not turn off your machine while the machine is saving the update software to itself.