If you see the following error message "Program failed to run",click here to learn how to solve the problem.
Notes:
-
Please do not turn off the machine until firmware update finishes.
-
You must be logged on as an Administrator.
-
If the "User Account Control" prompt is displayed, click "Continue"/ "Yes”.
Note: The button may differ depending on the operating system being used.
[When the machine is connected to the PC via USB]
-
Please make a temporary directory on your HDD to save the downloaded file. e.g. C:\bront
-
Start downloading.
-
Once downloading is completed, make sure that the machine is connected to the PC with a USB cable.
-
Double click the downloaded file.
-
-
The update will start.
-
When the "Successfully Completed" message is displayed, click 'Done'.
After updating the firmware, make sure you perform the print calibration to ensure that all the latest improvements are effective. To see how to perform the print calibration, click here.
[When the machine is connected to the network]
-
Please make a temporary directory on your HDD to save the downloaded file. e.g. C:\bront
-
Start downloading.
-
Once downloading is completed, double click the downloaded file.
-
-
-
When the "Successfully Completed" message is displayed, click 'Done'.
-
If you have other machines connected to the network, you can update the firmware on these machines by clicking 'Continue' and selecting the model you would like to update the firmware.
After updating the firmware, make sure you perform the print calibration to ensure that all the latest improvements are effective. To see how to perform the print calibration, click here.
Click here to view OpenSSL License.