다운로드
Linux printer driver (rpm package) |
설치 방법
-
Login as a superuser ( or use "sudo" option if it is required )
-
Download drivers
Download Linux driver.
-
Install Linux driver
- Turn on the printer and connect the USB cable.
- Open the terminal and go to the directory where the driver is.
-
Install Linux driver.The install process may take some time. Please wait until it is complete.
Command (for rpm) : rpm -ihv --nodeps (linux-drivername) -
Check if the Linux driver is installed
Command (for rpm) : rpm -qa | grep -e (linux-drivername)
-
Depending on the connection type you are using (USB or Network), follow one of the steps below.
(for USB Connection)- Open a web browser and go to "http://localhost:631/printers".
-
Check if the Device URI of your printer is "usb://Brother/(your printer's model name)"
If the device URI is different from the example above, please go to "Modify Printer" of your printer to select proper device and driver.
If your printer is not listed on "http://localhost:631/printers", please go to "http://localhost:631/admin" and click "Add printer" and select proper device and driver.
- Open a web browser and go to "http://localhost:631/printers".
-
Click "Modify Printer" and set following parameters.
- "LPD/LPR Host or Printer" or "AppSocket/HP JetDirect" for Device - lpd://(Your printer's IP address)/binary_p1 for Device URI - Brother for Make/Manufacturer Selection - Your printer's name for Model/Driver Selection
-
Try a test print
Open a text editor, write something and select "print" from the menu.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
1단계: 이 페이지의 소프트웨어가 얼마나 도움이 됩니까?
2단계: "도움이 되지 않음"을 선택한 경우 다음 목록에서 "도움이 되지 않음" 이유와 가까운 항목을 선택합니다(복수 응답 허용).
3단계: 추가할 의견이 있습니까?
이 양식은 피드백용으로만 사용됩니다.