다운로드

LPR printer driver (rpm package)

LPR printer driver (rpm package)

설치 방법

  1. Login as a superuser.
     
  2. Download LPR driver.
     
  3. Install the driver.
    1. Turn on the printer and connect the usb, network or parallel cable.
    2. Go to the directory where the driver is.
    3. Install LPR driver.The install process may take some time. Please wait until it is complete.
      Command  :  rpm  -ihv  --nodeps  (lpr-drivername)
    4. Check if the LPR driver is installed.
      Command  :  rpm  -qa  |  grep  -e  (lpr-drivername)
       
  4. Confirm/Configure a file according to your connection.

     

    1. Check the configuration filename for your distribution.
      Example:
      openSUSE, Ubuntu, Debian : /etc/printcap
      Redhat, fedora, Mandriva : /etc/printcap.local

       
    2. Edit the file according to your connection.
      For USB Connection (Default)
      Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
      For Network Connection
      replace ":lp" line to the following 2 lines
      :rm=(ip address of your printer)\
      :rp=lp\
      For Parallel Connection
      replace ":lp" line to the following line
      :lp=/dev/lp0\
       
    3. Restart the print system.
      Command  (for  lpr):  /etc/init.d/lpr  restart
      Command  (for  lprng)  :  /etc/init.d/lprng  restart

       
  5. Try a test print.

 

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 소프트웨어가 얼마나 도움이 됩니까?

2단계: "도움이 되지 않음"을 선택한 경우 다음 목록에서 "도움이 되지 않음" 이유와 가까운 항목을 선택합니다(복수 응답 허용).

  •     

3단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.