Downloads

LPR printer driver (rpm package)

LPR printer driver (rpm package)

If your download does not start automatically, please click here.

How to Install

  1. Login as a superuser.
     
  2. Check if pre-required procedures are completed
    For openSUSE
    For Fedora10 64 bit
     
  3. Download LPR driver.
     
  4. Install the driver.
    1. Turn on the printer and connect the usb, network or parallel cable.
    2. Go to the directory where the driver is.
    3. Install LPR driver.The install process may take some time. Please wait until it is complete.
      Command  :  rpm  -ihv  --nodeps  (lpr-drivername)
    4. Check if the LPR driver is installed.
      Command  :  rpm  -qa  |  grep  -e  (lpr-drivername)
       
  5. Confirm/Configure a file according to your connection.

     

    1. Check the configuration filename for your distribution.
      Example:
      openSUSE, Ubuntu, Debian : /etc/printcap
      Redhat, fedora, Mandriva : /etc/printcap.local
       
    2. Edit the file according to your connection.
      For USB Connection (Default)
      Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
      For Network Connection
      replace ":lp" line to the following 2 lines
      :rm=(ip address of your printer)\
      :rp=lp\
      For Parallel Connection
      replace ":lp" line to the following line
      :lp=/dev/lp0\
       
    3. Restart the print system.
      Command  (for  lpr):  /etc/init.d/lpr  restart
      Command  (for  lprng)  :  /etc/init.d/lprng  restart
       
  6. Try a test print.

 

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the software on this page help you?

Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)

  •     

Step 3: €Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit