Downloads

Machine's software

Machine's software

How to Install

Update Information   |   To check the software version   |   To update the software


 

Update Information

Version 1.62 (October 2021)

  • Improved the Weeding Box function.
  • Revised messages.

 

 

How to check the software version of your machine

 

 

  1. Press button_01 (Power Button) in the operation panel to turn on the machine.
     

     

  2. Touch button_02 in the home screen to display the settings screen.
    button_02

     
  3. Touch button_02 until Ver. is displayed.
    button_02

     
     
  4. If the version is already 1.62 or later, it is not necessary to update your machine with the program on this page.


 

How to update your machine's software

 

The machine’s software can be updated with any of the following three procedures.

 

  • Connect the machine to the wireless network when using Automatic Update Function.
  • Install CanvasWorkspace when updating Using the Application (CanvasWorkspace).
  • USB Flash drive and USB cable are sold separately.

 

 

Updating Using Automatic Update Function

 

Connect the machine to the wireless network when using this function.
For details, refer to How to connect my machine to a wireless network using the Setup Wizard.

 

 

Updating from the Home Screen

 

 

  1. Touch button_01 in the home screen.

      button_02
     

    If there is no new update file, button_01  does not appear in the home screen.

     

     

  2. Touch the Update key to retrieve the software.


    button_02

     

    When the update is finished, the machine automatically restarts.

     

    Do not turn off the machine while it is being updated.

    ▲TOP

 

Updating from the Settings Screen

 

 

  1. Touch button_02 in the home screen to display the settings screen, and then touch Ver.
    button_02 button_02 button_02


    The update method selection screen appears.


     
  2. Touch button_02.
    button_02


     

  3. Touch the Update key to retrieve the software.

    button_02

     

    When the update is finished, the machine automatically restarts.

    Do not turn off the machine while it is being updated.


     

    If there is no new update file, the following message appears.

    button_02

▲TOP 
 

 

 

Update Procedure Using USB Flash Drive

 

USB flash drive is sold separately.

 

 

After downloading the file, update the machine's software according to the following procedure.


 

  1. Insert the USB flash drive into the USB port on the computer.

    fig_04


     
  2. The "Removable Disk" icon appears in "Computer (My computer / This PC)" on the computer.


     

  3. Copy the update file to "Removable Disk" on the computer.
     

    The USB flash drive must not contain any data other than the update file.
    Otherwise, the machine may stop operating correctly.

     


     
  4. Safely remove the USB Flash drive from the USB port on the computer.
     

    fig_04


     

  5. Insert the USB flash drive containing the update file into the USB port on this machine.

     button_02

    This machine is incompatible with a USB hub. Insert the USB flash drive directly into the USB port.

     

     

  6. Touch button_02 in the home screen to display the settings screen, and then touch Ver. .
    button_02 button_02 button_02



     

  7. Touch button_02
    button_02

     
  8. Touch the Update key to start the update.

     

    fig_08

    When the update is finished, the machine automatically restarts.
     
    • Do not remove the USB flash drive while the machine is being updated.
    • Do not turn off the machine while it is being updated.

     
  9. Remove the USB flash drive from the machine.


▲TOP 
 

 

Update Procedure Using the Application (CanvasWorkspace)

 

With this function, the machine can be connected to a computer with a USB cable in order to retrieve the update file from CanvasWorkspace to update the machine. Before using this function, install CanvasWorkspace on the computer.

 

  • USB cable is sold separately.
  • We recommend using a USB 2.0 cable (Type A/B) that is no longer than 2 meters (6 feet).

 

 

  1. Install CanvasWorkspace on the computer.
    If the CanvasWorkspace has not been installed on your computer, click here to visit the download page to download it.
    If it's already been installed on the computer, go to next step.


     
  2. Insert the USB cable connectors into the corresponding USB ports on the computer and on the machine, and then turn on the machine.

    fig_08

     
     
  3. Display the home screen on the machine.

    fig_08


     
  4.  Start up CanvasWorkspace, and then click Check for the Latest ScanNCut DX Update… on the Help menu.

    fig_08


    When the following message appears, click OK to update the software.

    fig_08



    If there is no new update file, the following message appears.

    fig_08


     
  5. When the machine receives the update file, the following screen appears.

    fig_08

    When the update is finished, the machine automatically restarts.

▲TOP

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the software on this page help you?

Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)

  •     

Step 3: €Are there any comments you would like to add?

Please note this form is used for feedback only.