Downloads
Generic LPR printer driver (rpm package) |
Durchführen der Installation
-
Login as a superuser.
-
Check if pre-required procedures are completed
For openSUSE
For Fedora10 64 bit
-
Download LPR driver.
-
Install the driver.
- Turn on the printer and connect the usb, network or parallel cable.
- Go to the directory where the driver is.
-
Install LPR driver.The install process may take some time. Please wait until it is complete.
Command : rpm -ihv --nodeps (lpr-drivername) -
Check if the LPR driver is installed.
Command : rpm -qa | grep -e (lpr-drivername)
-
Confirm/Configure a file according to your connection.
-
Check the configuration filename for your distribution.
Example:
openSUSE, Ubuntu, Debian : /etc/printcap
Redhat, fedora, Mandriva : /etc/printcap.local
-
Edit the file according to your connection.
For USB Connection (Default)
Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
For Network Connection
replace ":lp" line to the following 2 lines
:rm=(ip address of your printer)\
:rp=lp\
For Parallel Connection
replace ":lp" line to the following line
:lp=/dev/lp0\
-
Restart the print system.
Command (for lpr): /etc/init.d/lpr restart
Command (for lprng) : /etc/init.d/lprng restart
-
Check the configuration filename for your distribution.
- Try a test print.
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich ist für Sie die Software auf dieser Seite?
Schritt 2: Wenn Sie „Nicht hilfreich“ gewählt haben, wählen Sie aus der folgenden Liste den Grund, der Ihrer Entscheidung am nächsten kommt. (mehrere Antworten möglich)
Schritt 3: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.